This Old House

Fix Squeaky Stairs With These Helpful Tips!

Squeaky stairs are an all-too-common problem for many homeowners. The creaking and groaning of wooden steps can quickly become a nuisance to anyone living in the home. Not only can it be noisy, but it can also present a safety hazard if the stairs become too unstable or difficult to use. In this blog post, we will explore some tips and tricks on how to fix squeaky stairs, so you can get back to enjoying your home in peace!

Why Do Stairs Squeak?

Stairs squeak for various reasons, but the most common cause is loose floorboards. As you walk up and down the stairs, the weight of your body causes the floorboards to move slightly. This movement creates friction, which in turn produces a squeaking sound.

Another common reason for stairs to squeak is that the stair treads are not properly attached to the risers. The tread is part of the stair you step on, while the riser is the vertical board that extends from the tread to the next higher tread or landing. If the treads are not securely fastened to the risers, they can move slightly as you walk on them, causing a squeaking sound.

Finally, stairs may also squeak if they are made of materials prone to creaking, such as wood. Over time, wood can become dry and brittle, causing it to creak when pressure is applied to it.

Fix Squeaky Stairs
Pear Stairs

How to Fix Squeaky Stairs

If your stairs are starting to squeak, there are a few things you can do to fix the problem. First, check to see if the squeak is coming from the stair treads or risers. If it’s coming from the treads, you’ll need to add some support underneath them. This can be done by screwing in a few screws or nails into the joists below the stairs.

If the squeak comes from the risers, you’ll need to add some shims between them. Shims are thin pieces of wood that help to level out uneven surfaces. You can find them at any hardware store. Once you have your shims, wedge them between the riser and stair tread until the squeak disappears.

What Tools Do You Need?

If your staircase is starting to squeak, it’s probably time to give it a little TLC. The first thing you’ll need to do is gather the right tools for the job. You’ll need the following:

  • A screwdriver
  • A hammer
  • Nails
  • A chisel
  • Wood glue

With these tools in hand, you’ll be able to fix your squeaky stairs in no time!

Fix Squeaky Stairs
Horner Millwork

How to Prevent Squeaky Stairs

If your stairs are starting to squeak, there are a few things you can do to prevent the noise from getting worse. First, check to see if there are any loose screws or nails. If so, tighten them up. You may also need to add some wood glue to secure the steps.

Another way to prevent squeaky stairs is to lubricate the joints. You can use WD-40 or another lubricant designed for metal. Just spray it on and work it into the joints with your fingers. This will help reduce friction and quiet the noise.

If your stairs have carpet, make sure it is stretched tight and not bunched up. Loose carpet can cause the stairs to creak as you walk on it. Finally, if all else fails, you can always try placing a piece of felt or other material under each step to help muffle the sound.


Squeaky stairs can be a nuisance, but they don’t have to stay that way. With the right supplies and the proper steps, you can easily fix squeaky stairs in no time. Whether it’s WD-40 or wood glue, plenty of solutions are available for fixing your squeaky stairs – so what are you waiting for? Get out there and fix those pesky creaks for good!

Also read: 5 Easy Steps on How To Install Solar Panels

Leave A Reply

Your email address will not be published.